Z1 Series Wide-FOV Line Laser 3D Profiler
Micron-Level 3D Inspection for Harsh Industrial Environments
High Z-axis accuracy, dense profile points, 10,000 fps ultra-fast acquisition, and built-in edge computing
0.08 mm Repeatability
0.08 mm ultra-high repeatability ensures consistent measurements, reliably capturing subtle deformations and fine contour differences for industrial 3D inspection and material metering.
4096 High-Definition Points
Up to 4,096 sampling points per profile, enabling high-density lateral point distribution and significantly improving lateral resolution.
10,000 fps Ultra-Fast Acquisition
10,000 fps ultra-fast acquisition minimizes motion blur during high-speed movement, stably outputting high-quality sensor data across dynamic operating scenarios for reliable inline industrial inspection.
Wide-FOV Line Laser 3D Profiler
Z1 Series
*Product appearance on this website may vary due to screen display, batch, or customization; refer to actual samples/products. Specifications are typical values under specific test conditions and may vary by batch, hardware version, or usage; factory inspection prevails. Certification per official documents. Kyle Optics Ltd. reserves the right of interpretation for information on this website.
*Before use, please read the relevant safety instructions.
Specifications
| FOV | 85° × 25° (H × V) |
|---|---|
| Width × Depth Range | 1260 × 440 mm |
| Depth Accuracy | ±0.4 mm |
| Points per Profile | 4096 |
| Scan Rate | 10 kHz |
| Data Output | Profile Data, Depth Map, Intensity Map |
| Computing | Built-in edge computing module supporting real-time on-device 3D processing |
| Dimensions | 421 × 100 × 95 mm |
|---|---|
| Weight | 3 kg |
| Protection Rating | IP67 |
| Housing Material | Aluminum Alloy + Composite |
| Light Source | 450 nm (Blue Laser) |
| Operating Temperature | -20℃ ~ +60℃ |
|---|---|
| Storage Temperature | -40℃ ~ +85℃ |
| Supply Voltage | 24 V |
| Power Consumption | 20 W |
| Communication Interface | Gigabit Ethernet |
Applications
